Ceramic cutting tool – it`s changeable cutting inserts made from ceramic based materials (Al2O3, SiC etc) and applied for high speed turning of cast irons and steels.
The main application of our ceramic tool is a turning of cast iron metallurgical rolls. Such rolls usually applied on the production of rebar and wire.
In practice very often the Customers perform this operation at their roll-turning shops on special foreign machines ATOMAT or HERKULES using our ceramic cutting tool.
You can find more information about the most popular shapes and dimensions of our ceramic inserts in the following table:
RNGN ceramic inserts
| Size | ISO designation | d, мм | t, мм | Chamfer | Grade of material |
| 06 | RNGN 060300 T01020 | 6,35 ±0,025 | 3,18 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 |
| RNGN 060400 T01020 | 6,35 ±0,025 | 4,76 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 | |
| 09 | RNGN 090300 T01020 | 9,525 ±0,025 | 3,18 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 |
| RNGN 090400 T01020 | 9,525 ±0,025 | 4,76 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 | |
| 12 | RNGN 120300 T01020 | 12,70 ±0,025 | 3,18 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 |
| RNGN 120400 T01020 | 12,70 ±0,025 | 4,76 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 | |
| RNGN 120600 T01020 | 12,70 ±0,025 | 6,35 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 | |
| RNGN 120700 T01020 | 12,70 ±0,025 | 7,94 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 | |
| 15 | RNGN 150700 T01020 | 15,87 ±0,025 | 7,94 ±0,13 | – / T01020 / K20015 | W630 / W650 / W660 / W670 |
| 19 | RNGN 190600 S02015 | 19,05 ±0,025 | 6,35 ±0,13 | – / S / T01020 / K20015 | W630 / W650 / W660 / W670 |
| RNGN 190700 S02015 | 19,05 ±0,025 | 7,94 ±0,13 | – / S / T01020 / K20015 | W630 / W650 / W660 / W670 | |
| 25 | RNGN 250900 S02015 | 25,0 ±0,025 | 9,52 ±0,13 | – / S / T01020 / K20015 | W630 / W650 / W660 / W670 |
RCGX ceramic inserts
| Size | ISO designation | d, мм | t, мм | Chamfer | Grade of material |
| 06 | RCGX 060400 T01020 | 6,35 ±0,025 | 4,76 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 |
| RCGX 060600 T01020 | 6,35 ±0,025 | 6,35 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 | |
| 09 | RCGX 090700 T01020 | 9,525 ±0,025 | 7,94 ±0,13 | – / T01020 | W630 / W650 / W660 / W670 |
| 12 | RCGX 120700 T01020 | 12,70 ±0,025 | 7,94 ±0,13 | – / T01020 / K20015 | W630 / W650 / W660 / W670 |
| 15 | RCGX 151000 T01020 | 15,87 ±0,025 | 10,0 ±0,13 | – / T01020 / K20015 | W630 / W650 / W660 / W670 |
| 19 | RCGX 191000 S02015 | 19,05 ±0,025 | 10,0 ±0,13 | – / S / T01020 / K20015 | W630 / W650 / W660 / W670 |
| 25 | RCGX 251200 S02015 | 25 ±0,025 | 12,0 ±0,13 | – / S / T01020 / K20015 | W630 / W650 / W660 / W670 |
